球探网官方主页

SR / SP type controller

Product introduction: SR / SP controller is installed on the die slide of the bending machine, which is convenient for manual operation. It is used with BLPS sensors to provide multiple relay passive contact outputs and multiple working mode options. According to the characteristics of processed materials, SR / SP controllers provide three working modes: normal mode, box folding mode, and suppression mode. The normal mode monitors all the detection beams of the sensor, the folding box mode monitors the light beam below the die edge, and the suppression mode does not monitor the sensor signal. The SP type controller monitors the upward signal, the downward signal, the variable speed signal, the normally-closed point of the fast-relay relay, and the normally-opened point of the slow-relay relay. This controller fully monitors the signal of the bending machine, which can realize more complex functions. The SR controller monitors the variable speed signal and outputs two sets of normally open point OSSDs. This model only monitors variable-speed signals, and the wiring is simple and adaptable.

share to:

Features

Simple wiring and strong adaptability
3 control modes available

Typical wiring diagram

SP type safety controller wiring diagram
SR type safety control wiring diagram
Environmental characteristics
Ambient temperature jobs -10 ℃ ~ 55 ℃ (no frost and condensation)
storage -40 ℃ ~ 70 ℃
environment humidity jobs 35% RH to 85% RH
storage 35% RH ~ 95% RH
Protection class IP54
Dimensions 190 × 150 × 58mm
Electrical characteristics
voltage AC100V ~ 230V ± 10%, 50 / 60Hz DC24V ± 10%
Machine power consumption ≤8.5W
Output form Safety relay contact signal
Output contact capacity Contact capacity 5A, 250VAC / 5A, 24VDC
Start Time < 3S
Detection function Real-time self-test
protect the circuit Over-voltage and over-current protection; output short-circuit protection

SR / SP safety controller specifications
yle = "text-align: center;"> Bending machine protection device SR / SP type controller dimensional drawing

Keli Optoelectronics Copyright 2018-2028 Website record number: Lu ICP No. 140080611-1